“We are looking to have four pieces of custom wood furniture made: • 2 rectangular end tables • 1 square coffee table • 1 media cabinet We have a piece of wood furniture made from teak that we would like to match in color and style (see attached photos). We’d like the pieces we are requesting to be made of teak too, if possible. Thoughts on the media cabinet (see attached hand drawing): • approximately 48” wide plus an overhang on the top of 4” on the sides and 24” deep, overhang on front and back of an additional 2” on each • two doors with three adjustable shelves on each side for components • the shelves to be 20” deep (i.e., slightly shorter than the full depth of the cabinet so we can have space for cords to comfortably fit behind the components) • shelves should have a small lip at the back so the media component doesn’t slide off the back • the back panel of the cabinet should be vented (on both sides) for cords to fit through • the back panel is removable i…f possible
• on top of the shelved section with the doors, we want a center opening (for a speaker) which is 24” wide x 8.5” high; on either side of which should be a drawer

We have also identified an end table style (one drawer with a shelf, see attached) from a furniture website, but this should also be designed in a style to match our existing piece of furniture. Standard end table height and width are fine, but the top should overhang the base by 2”.

The coffee table base should be 42” x 42” square with an additional lip on the table top of 2” on all sides. We’d like it to match the end table in that it would have one drawer (or possibly 2 drawers side-by-side) and a shelf.

Send us your phone number if you have questions and we will give you a call.
”