This is a listing for Toni. If you are not them, please do not purchase this.
As discussed in other messages, here is a quick summary of the bell.
The bell with base will be just under 48 inches tall, about 34 inches wide, and if you count the depth of the the base plate, about 24 inches deep from front to back. The base plate will have holes drilled near the corners to stake it down to the ground.
I am using an 8 inch diameter cylinder that is about 24 inches long in the design. It will have a ring that is approximately 3 inches in diameter on top to hook it onto the stand.
The "Peace Cross" will be approximately 6 inches wide by 9 inches long.
The bell will have the "Peace Cross" Japanese Kanji plasma cut into one side of the cylinder.
I am estimating the whole thing will be about 80 pounds.
The cylinder and stand will be sanded smooth then acid washed to create a patina. The acid wash will be neutralized for safety. The bell and stand will then be washed with fresh water multiple times to clean them and to continue the aging or patina process.
The increase of $100 in the price is due to the plasma cut design in the cylinder. This process is done by hand and then must be cleaned, sanded or ground smooth to protect all parties.
The bell will have a metal disc inside to act as a clapper or striker. It will also have a nylon string inside to suspend the clapper and the wind catcher.
Due to my previously scheduled work travel, the bell will absolutely be delivered before September 9. All efforts will be made to finish the bell before that date.
Artist will hand deliver the bell to the purchaser.

View Shipping & Maker Policies