This bed is made from solid black walnut with a solid curly maple inlay in the rails. The head board is showing of curves and beauty. The posts are glued to 4" x 4" with a beaded route on the corners. The midle of the head board are curved raised panels with an air space above them. The space above is filled in with custom turned spindles that connect the top rail with the middle. The top rail is 3" wide with and applied moulding over the very top. The posts are topped with a capital and custom turned balls. The balls have a curly maple inlay in them to match the bed rails. The foot board is made up with straight raised panels and the same type of posts and cap. The middle part of the head and foor board are attached to the legs with mortise and tennon joinery. The entire bed is finished with a durable lacquer finish for smoothness and beauty. The bed is made up of 4 major peices that do seperate. The head board and foot board have metal fastners mortised into them that receive the metal hooks attached to the rails. The support slats under the box spring are also included. On the slats are adjustable support feet and metal fastners to attach to the bed rails.
Dimensions: This is a California King sized bed. It can be made to fit anysize matress. The heighth of the head board is 6 feet tall. Any of the sizes are able to change because this is a custom made bed.