Custom LED lighted acrylic sign using the customer drawing with dimensions. The material used is 1/8th inch thick cast acrylic. The text in the drawing is laser engraved on the back side of the acrylic so that the front remains smooth. Red, White, and Blue LEDs are placed on both sides of the acrylic to light up the text. There is a small angle of fan out from each LED which could cause minor overlap of the colors as they approach the center of acrylic. Normally this is minimal. The edges of the acrylic are framed in black plastic which also house the LEDs. A low voltage cord will be attached to the LEDs and exit the framing. An AC/DC transformer is included and connect to the LED cord. The LED colors are Red, White, and Blue. Two mounting holes are placed on the upper section of the acrylic. Your own text and images may be incorporated into a LED sign. The size of this sign is 20x24 inches.
Made in Vineland, NJ
All of our products are handmade
by expert makers.
No reviews yet
Each week, expert artisans from across the country become makers on CustomMade.
Every maker has a story. Be a part of Frontiernow Engraving and Graphics, LLC's story by placing an order, leaving a review, and seeing your review appear here.