New heavy duty handcrafted pair of working chinks. I made these chinks out of 5/6 oz. chap leather. Hip & legs yokes are cut out of 8/9 oz. veg-tan leather & are border stamped. Adjustable 1 1/2" wide back belt is cut from 9/10 oz. veg-tan leather, is border stamped with a 1 1/2" stainless steel buckle. Adjustable 3/4" front belt is cut from 9/10 oz. veg-tan leather with a 3/4" stainless steel buckle. Yokes & belts are dyed timber brown in color with edges beveled, hand rubbed & dyed black for a nice finished look. 3 adjustable leg straps per leg with 3/4" chap snaps & 3/4" D rings. Each leg has a full leg support piece, 3 - 1 1/2" stainless steel star saddle conchos, not the cheap tin type. Mecate ring on left hip yoke. Tie string ring on right leg. Pocket with flap & leather button on left leg. Yokes, pocket & leg support pieces are glued & machine stitched. These chinks adjust from 40" to 46" around the hips. From top of hip yoke above the front belt to where fringe starts is 21". 9 1/2" long fringe on the bottom of the legs. Belts & Mecate ring are attached with copper rivets & burrs. Included & cut from the same hide is a pre cut & punched repair kit for the strap & D ring parts just in case you break any. Made to last, maker stamped & Made in the USA.