Food Safe Functional Art Cedar Tree Trunk Trivets In Random Or Custom Shapes

New Items!
These Food Safe Cedar Functional Art Cedar Tree Trunk Trivets in random or custom shapes are approximately 12 1/2" x 11" 2 1/2" Diameter and 2 1/2" High. All the dimensions are approximate and will vary depending upon the shape requested.
The pieces can be made in random or custom shapes such as triangle, square, circle or other forms. Please note if a special shape is required. Prices may change depending upon the shape requested.
This piece can be used as a cake stand, tray, trivet, table or wall decoration; or what ever you fancy.
The pieces were made from an Alabama Cedar Tree that was damaged during a storm. Each art piece can be made with or without the feet. Please note when ordering.
Each piece has the outer layers of the bark removed, hand cut to the required shape, planed, sanded and then 6-7 coats of satin finish lacquer was applied. The surfaces were sanded before each coat of lacquer is applied.
The piece has been leveled with four (4) cedar feet to complete the finished look. The underside and feet have multiple coats of satin finish lacquer to finish the piece. A felt pad has been placed on each foot.
The center of the tree has a beautiful red swirling grain.
As the piece ages, patterns can change and cracking can occur which adds to the beauty and uniqueness of the piece. This will vary depending upon the environment.

Polyurethane is food safe after allowing the lacquer to cure for 30 days at room temperature. Also, if people want to allow direct contact of food, the surfaces should be thoroughly cleaned with soap and water and properly dried and stored before use. The polyurethane surfaces are not design for use as a cutting board. This will damage and destroy the surfaces and create pockets where bacteria can grow.Custom item 2-3 weeks if not in stock.
Shipping and insurance costs are estimated for delivery to the West Coast (See Shipping & Policies). If less, a refund is provided when shipped.

View Shipping & Maker Policies

Made in Oneonta, AL

By mr2 Woodworking


All of our products are handmade
by expert makers.

No reviews yet

Each week, expert artisans from across the country become makers on CustomMade.

Every maker has a story. Be a part of mr2 Woodworking's story by placing an order, leaving a review, and seeing your review appear here.

More Projects by Rick Ricks

Other projects you might like

Also Appears In