Walnut End Extension Dining Table With Bench

Customer requested an end extension walnut Dining Table, but only the end board should move out to allow an extension to be secured in place. End boards are attached to solid metal slides and open to allow a 12" wide leaf.
Table leaves are stored under the top at either end of the Table.
Solid walnut is used throughout the table and bench except the top, which is made from 3/4" thick top grade walnut plywood. The table and bench pedestals, although different sizes, were cut and shaped to match. The bench is sized to slide under the table when not in use.
The complete table, leaves, and bench received several coats of Watco's dark walnut danish oil. This was followed by several coats of a satin polyurethane, which was sanded smooth between coats. A final application of a high quality wax with first a power buffing, followed by a gentle hand buffing to bring out the wood color and grain.
Approximate table dimensions are: 30" tall x 38" wide x 6'-0" without the 2 leaves; with the 2 leaves the table is 8'-0" long.
More than 12 weeks may be necessary to complete this gorgeous walnut end extension Dining Table with Bench; contact the craftsman through the Custommade.com website for details.

View Shipping & Maker Policies

Made in Dowling, MI

By The Plane Edge, LLC

All of our products are handmade
by expert makers.

No reviews yet

Each week, expert artisans from across the country become makers on CustomMade.

Every maker has a story. Be a part of The Plane Edge, LLC's story by placing an order, leaving a review, and seeing your review appear here.

More Projects by Steve Kelly

Other projects you might like

Also Appears In