Hand forged full tang knife with hand made leather sheath. Blade is 80CRV2 steel,3/16" thick with black-on-black G-10 handle. It has a dagger point with modified scandi grind cutting edge and saw spine. Blade 6 3/4" / handle 5 1/2". The blade reduces in thickness from 3/16 at the spine to 5/32 at the grind top line to allow wood chip clearance so the saw does not bind when sawing. There are two brass pins in the handle with a copper bradded pin in the fire bow spindle socket at center in the handle. The two lanyard holes in the butt have copper tube inserts bradded in. There are two larger holes behind the plunge line with copper tubes bradded in, these along with the two lanyard holes at the butt facilitate the binding of the knife to a staff to make a formattable spear for survival applications.