These sturdy hidden shelf steel brackets are designed to support floating shelves up to 14" deep and 1.5" or more thick. Our solid steel fabrication method results in ultra heavy-duty brackets!
The weight capacity of these brackets varies according to the length and thickness of your shelf and the length of the bracket. Depending on the actual bracket size and style, they can hold up to 45 pounds per horizontal rod in the bracket (assuming that the bracket is mounted securely into wood). More horizontal rods results in more weight capacity; so for greater weight capacity, using multiple shorter brackets is recommended.
Mounting holes are drilled 1 inch from each end and 4 inches on center. If these holes do not line up with a stud or blocking, the bracket back bar can be drilled through with a 3/16" drill bit to make a hole that will line up as needed.
- Handmade 100% solid steel.
- Each bracket comes pre-drilled with multiple mounting holes, for easy installation.
- Quality multi-coat rust inhibiting paint finish.
- Standard bracket sizes are available from 10" to 78" wide.
- Larger sizes are also available -- just ask!
NOTE: Since mounting surfaces and locations vary, hardware (wood screws, lags, drywall anchors, etc.) is not included. If a wall stud is not available for secure fastening, please use appropriate anchors. These brackets are strong but must be attached properly to hold a heavy load. If you are unsure of how to properly install them, please consult a contractor or skilled handyman.
- Ships to USA and Canada
Made in Pismo Beach, CA
All of our products are handmade
by expert makers.
No reviews yet
Each week, expert artisans from across the country become makers on CustomMade.
Every maker has a story. Be a part of Rustic Furniture Hut's story by placing an order, leaving a review, and seeing your review appear here.