Two 8" x 20" stained glass panels made for a customer. The pattern was made to an exact size using a template. Once the glass type was chosen the pieces were cut out and then the edges were ground down on a wet saw to remove the sharpness and fit to size. After all the pieces were finished the edges were then wrapped with a copper foil. Once fitted into a template frame the pieces are soldered together on both sides. Then a thin brass frame is cut to size and soldered around the outside of each panel for strength. The panels are then cleaned and a black patina was added to the solder seams. The last step is the polishing of each piece and they are ready for installation into the customer's hand made wood cabinet.
Made in Southold, NY
All of our products are handmade
by expert makers.
From beginning to end this was an excellent experience.