mr2 Custom Walnut Hand Crafted Mud Room Storage Unit with two, three or four Nooks for storage and seating. This piece is only offered for the Birmingham and Northern Alabama area. Local pick-up by the customer is required. Assembly at the customers location is extra.
The Mud Room Storage Unit comes in the following sizes:
Two Nook: 84" High x 35" Wide x 15" Deep
Three Nook: 84" High x 51" Wide x 15" Deep
Four Nook: 84" High x 68" Wide x 15" Deep
See the diagram for specific details of the storage unit dimensions
• Each piece is made to the following specifications:
• Solid hardwood Poplar used. Multiple boards that have been compression glued with biscuits to achieve the widths. No veneers.
• All surfaces fine sanded and ready for painting except reclaimed bench seat.
• Simulated reclaimed bench (nail holes, scratches, worm holes, accents, etc.). The bench seat is finished with multiple layers of Tung oil and stained to customer requirements. Made from solid 8/4 Oak
• The back enclosure is made of ¼" bead board or rustic board. The two sections are secured to the back frame of the unit with 1 1/4" wood screws.
• The shelves are attached to the risers with multiple pocket screws which are then filled with plastic wood and fine sanded flush.
• The wooden frame and back is finished with a satin finish solid color of stain of the customers preference. Samples will be sent to the customer prior to finishing.
• All vertical risers and top are secured with 2 ½" power head screws and covered with hardwood dowels for finishing by customer.
• The Reclaimed Bench is secured to the seat supports with 2 ½" powerhead screws a dowels and covered with hardwood dowels.
• The storage unit is built in five sections (Bench Legs, Oak Seat, Storage Section and 2 Back Enclosures) for ease of handling and transport. The sections are joined using countersunk power head screws and wood screws all located below the bench seat.
• The unit has been completely assembled and disassembled prior to pickup to insure proper fit and level.
Custom item, shipment would be 6-8 weeks dependent upon backlog.
mr² Woodworking also has unique custom furniture, benches, cabinets and specialty wood items available thru Custom Made. Please do not hesitate to contact us for special request, colors or designs.
Made in Oneonta, AL
All of our products are handmade
by expert makers.
No reviews yet
Each week, expert artisans from across the country become makers on CustomMade.
Every maker has a story. Be a part of mr2 Woodworking's story by placing an order, leaving a review, and seeing your review appear here.