Coffee Table Base for Customers Old Pinball Machine. Table was made to fit the design of the customers Pinball Machine Top (he supplied a tracing of the Pinball Top). Base was made from 3/4" Poplar, which then had two coats of Primer and Two costs of Black Satin Lacquer paint applied (each coat was sanded before next coat was applied). Legs were tapered on the sides as well as back to front. Pinball machine was screwed to base from the inside of the machine.
Made in Lebanon, PA
All of our products are handmade
by expert makers.
Stephen did a great job finishing off one of my "to do" list projects. This pinball coffee table came out great. Thanks again.