Define unique style in this wavy copper bangle! This contemporary copper bangle is made with solid copper wire that has been manipulated, forged and soldered together. This unique bangle features two cubic zirconia gemstones that are bezel set in yellow brass settings at polar opposite ends of this bangle. The copper wire in this piece has been oxidised to create a stunning blue-black patina. This bracelet is soldered at several contact points, giving it a rigid, solid feel. The irregular, unique curves of each bangle gives this piece a nice, organic feel.
Each bangle I make is completely unique and near impossible to replicate. The bangle you receive will have slight variations in exactly where the wire bends and curves, but will have the same dimensions, feel and look.
At the widest point, this bangle measures approx. 1.5" (38mm). At the narrowest point it measures appox. .75" (19mm).
Please note that the bangle featured with the model is NOT the bangle listed, but simply an indication of size, style and fit.
This bracelet comes in 2 sizes that have been tried and tested with wrists of all shapes and sizes. If you feel as though either of these available sizes will not fit, please don't hesitate to contact me as I can easily make a custom sizing for you.
These bangles fit small to medium wrists. Each bangle measures 2.5" (65mm) across (inside diameter). The circumference measures 8.5" (216mm). The bangle wire is .12" (3mm) thick.
To measure your hand to see if these will fit, simply grab a tape measure and measure the distance from the pinky knuckle on the palm of your hand to the index finger knuckle (i.e the widest part of your hand). Subtract half an inch (15mm) from your measurement. For example, if your hand measures 3" (76mm) across, your measurement would be 2.5" (64mm) to account for the movement of squeezing your knuckles through the bangle.
These bangles will fit a 3.5" (89mm) hand or smaller.
The large size measures 3" (7.5cm) across (inside diameter)
These bangles will fit a 4" (10cm) hand or smaller.
Made in Tucson, AZ
All of our products are handmade
by expert makers.
No reviews yet
Each week, expert artisans from across the country become makers on CustomMade.
Every maker has a story. Be a part of Leander D'Ambrosia Wearables's story by placing an order, leaving a review, and seeing your review appear here.